HDMI Over CAT5E / CAT6 Extender Wall Plate w/ LED Indicator (Pair) - Single Port (1P) - White
- WP-8200
- $24.99
- $21.99
- Buy 3~5, $20.99 each Buy 6~9, $18.99 each Buy 10+, $18.49 each
The HDMI Wall Plate Extenders use Cat5e or Cat6 network cables to transmit the HDMI audio-video signal over distances greater than the 25 foot maximum certified for High Speed signals using HDMI cables alone. To use them you need to run two Cat5e/6 cables through the walls. Note that these must be CL2 rated for in-wall use and must be wired to the EIA/TIA-568B standard.
Next you plug the ends of each cable into the backs of the wall plates. Make sure that the wall plate labeled "HDMI IN" is at the source side and the one labeled "HDMI OUT" is at the destination end. Once the cables are inserted into the wall plates, screw in the cable bridges to make sure they do not disconnect or come loose.Tip: The Cat5e/6 cables need to be plugged into the appropriate jack on the back of the wallplate, labeled 1 and 2. To make it easier to identify which cable is which, it is recommended that you use different colored cables. So, for example, the Red cable would be Cable 1 and the Green cable would be Cable 2.
Your HDMI Extender is now ready for use! Under most circumstances the system will draw all necessary power from the HDMI cable itself. If you have signal reliability issues, you may need to plug a 5 VDC AC adapter into one or both of the wall plates to provide necessary power. Alternatively, you can hardwire a 5 VDC AC adapter into the back of the remote wall plate (labeled HDMI OUT), with the positive wire connected to the + and the negative wire connected to the - connection.Note: 123ink strongly recommends the use of minimum 24 AWG HDMI cables when connecting a device, such as this extender, between the source and destination devices to ensure minimal signal loss and maximum High Speed signal reliability.
Specifications
- Extends HDMI 1080p signals reliably up to 30 meters (90 feet)
- Automatic adjustment of feedback, equalization, and amplification
- Powered by the HDMI cable in most installations
- Optional 5 VDC power input for the rare cases when self-power is insufficient for a reliably signal
- Conforms to North American wall plate standard
- Can use Cat5e or Cat6, UTP or STP cabling
- Supports HDMI resolutions up to 1080p with 12-bit color depth
- Supports high resolution audio, including DTS-HD Master Audio and Dolby True-HD audio
Warranty
There is no special warranty for this product.
Most of our accessories such as cables, adapters, cell phone cases or batteries and chargers are covered by our ONE YEAR GUARANTEE policy. You may read our PRODUCT GUARANTEE and RETURN & REFUND policies for more details.
Similar Products
- Display port to HDMI Converter
-
- $22.99 $12.99
- - + Add To Cart
- 43%Off
- SMK-Link VP6150 Rechargeable Bluetooth Notebook Mouse With A Gift Pack(Retail Box)
-
- $29.99 $24.99
- - + Add To Cart
- 16%Off
- 1" IPOPO Ring Green Binder
-
- $2.99 $1.99
- - + Add To Cart
- 33%Off
- 6 FT New Mini Displayport to VGA (Male) Adapter Male Cable for Apple MacBook
-
- $45.99 $24.99
- - + Add To Cart
- 45%Off
Customers who buy this also buy
- 4' Rocketfish RF-G1139 Hi-Def Component(M) to (M) Video Cable Gold-Plated Connectors
-
- $8.99 $3.99
- - + Add To Cart
- 55%Off
- High Speed HDMI Cable 28AWG - 3ft w/Ferrite Cores (Gold Plated Connectors) - BLACK
-
- $2.49
- - + Add To Cart
- 75FT Blue Amazetec High Quality Cat6 550MHz UTP RJ45 Ethernet Bare Copper Network Cable (New, Retail Box)
-
- $11.99
- - + Add To Cart
- HDMI® Extender Using Cat5e or CAT6 Cable - Extend Upto 98ft
-
- $42.99 $19.99
- - + Add To Cart
- 53%Off
- Travel Universal AC Adaptor All in One UK US AU EU CA Multi Plug
-
- $9.99 $4.99
- - + Add To Cart
- 50%Off
- PREMIUM 6FT Optical Toslink Digital Audio Cable with Metal Fancy Connector
-
- $9.99 $5.99
- - + Add To Cart
- 40%Off
- 75FT Yellow Amazetec High Quality Cat6 550MHz UTP RJ45 Ethernet Bare Copper Network Cable (New, Retail Box)
-
- $11.99
- - + Add To Cart

